MIRA Safety Butyl Haz-Gloves
Our new HAZ-GLOVES are heavy-duty butyl gloves designed for practical long-term use in a wide variety of hazardous situations. Thanks to their enhanced thickness, they provide more than 150 minutes of flexible and proven protection from toxic industrial chemicals (TICs) and chemical warfare agents (CWAs). Designed based on the protective gloves trusted in labs and on dangerous worksites around the world, these gloves can protect you from some of the most caustic and corrosive threats known to man.
KEY FEATURES:
- Each set comes with four gloves total—two cotton glove liners to absorb moisture and make the system more comfortable to wear, along with two butyl gloves
- 32-mil (.08 mm) butyl rubber construction—129% thicker than the US military standard—for maximum durability and protection
- Proven to provide more than 150 minutes of protection from corrosive CBRN threats
- Allow for the operation of tools or weapons while providing comprehensive protection from CBRN contaminants
- Superior protection from chemical threats for up to a decade
- Extended sleeve to fit under a MIRA Safety HAZ-SUIT or other hazmat suit
- Available in three sizes
- Proven protection from CBRN contaminants (tested with direct exposure to mustard gas)
- Reusable butyl gloves reduce cost and waste compared with disposables
- Based on Serbian military design that was developed and enhanced for MIRA Safety
- Backed by MIRA Safety’s 1-year warranty
SIZE GUIDE
|
Size |
A (mm) |
B (mm) |
|
Small |
95 |
116 |
|
Medium |
100 |
120 |
|
Large |
102 |
128 |
TECHNICAL SPECIFICATIONS FOR BUTYL GLOVES
Our new HAZ-GLOVES butyl gloves are 129% thicker than military standard 14-mil gloves, providing unmatched resistance to a variety of extremely hazardous threats and resisting oxidation, ozone corrosion, and even abrasion—all while remaining flexible and usable, even at low temperatures.
These butyl gloves go above and beyond the standards of the CBRN gloves used by the US armed forces, offering a similar level of CBRN protection, all in a robust package that’s meant for extended use.
The same kind of thick butyl gloves are trusted in labs and manufacturing facilities around the globe, from forensic labs to emergency response, heavy manufacturing, chemical mixing, and even medical research facilities.
Whether completing precision tasks in a laboratory or manipulating your firearm under duress in a toxic environment, MIRA Safety HAZ-GLOVES are the best choice. In any environment, at any temperature, and under exposure to practically any CBRN threat, these butyl rubber gloves are engineered to perform and protect.
Combined with a MIRA Safety gas mask and HAZ-SUIT, chemtape and boots, our HAZ-GLOVES complete your PPE kit for total body protection.
TECHNICAL DATA
SORS 6701/05 Test Results (Defense Standard of the Republic of Serbia)
Density of contamination: 17 ± 1 mg S-mustard / 10 cm2
Breakthrough density of contamination: 5 µg S-mustard / 1 cm2
Test tube dimension: Ø 40 mm
Test temperature: 36 ± 1°C.
Standard protection time: >150 mins
5X contamination / decontamination protection time: >100 mins
Shelf life: 10 years
Weight: <250g
BUTYL GLOVES STORAGE
MIRA Safety HAZ-GLOVES (like all butyl rubber gloves) should be stored in their original packaging in a dark room at a temperature between 41°F and 77°F with a relative humidity of less than 75%. In these conditions, HAZ-GLOVES can be stored for 10 years or longer. These gloves are 100% butyl rubber and should be handled as such, so inspect for cracking especially in flexion spots after use.
